Screenshot_36

Custom Manufacturing Solutions for Modern Product Development Teams

Sometimes, a great product concept can quickly become unappealing once quotes come back for manufacturing it – due to high part prices, incompatibility between parts, challenges in working with a material, etc.

In many cases, these issues can be traced back to the very earliest stages of the design and specification phase, well before any manufacturer has been consulted.

Having access to custom manufacturing can help you work to your desired product specification, rather than being restricted to an existing catalogue of manufactured options, but there will need to be some rigour to the approach, to ensure a functional, reproducible and economically-viable end product.

What You’ll Learn from this article:

  • How to write an effective product specification / ‘build’ brief
  • Selecting the appropriate custom manufacturing technique
  • Effective use of prototyping
  • Considering manufacturing and lead times
  • Partnering with your manufacturer
  • Conclusion

How to write an effective product specification / ‘build’ brief

A sketch of a desired end product is often all that will be supplied to a manufacturer, and in itself is rarely sufficient to enable a complete design process to begin.

Some initial information that is helpful to collate when asking for a quotation:

  • Function – What does the product need to do?
  • Size – Are there any non-negotiable dimensions / flexibility on dimensions?
  • Material requirements – e.g. corrosion resistance, surface treatment, structural properties.
  • Volumes – Prototype, small batch, re-occurring order?
  • Testing/acceptance criteria – What will be used to verify the part is acceptable?

Provide this in as short an overview as you can, ensuring that your expectations (e.g. tolerances, test to demonstrate suitability, loads,) are sufficiently detailed, rather than open to interpretation.

For example, if developing a custom office partition, you would want to know the minimum size, method of attachment, working environment, surrounding furniture, finish, etc. For some ideas, you can browse this selection of desk partitions and custom manufactured products from the team at ECO Manufacturing. This illustrates that identifying an application/use can be the driving factor behind developing a suitable specification.

How many aspects of the specification can be relaxed to assist manufacturing?

Selecting the appropriate custom manufacturing technique

As with most product manufacturing, there will be various methods available to produce your part, and it will be determined by your geometry, material, volumes, finish, etc.

Some of these methods are outlined below, and you can discuss them in more detail with your chosen manufacturer(s):

  • CNC machining – where precision is important, but note machine run-times can significantly increase cost
  • Fabrication – bending, joining, etc., of sheet; consider bend lines, joints, fixings, etc.
  • Moulding – if you’re expecting repeat orders of moulded plastic, consider investing in moulds
  • Additive manufacturing (AM) – can be used for rapid prototyping and manufacture of bespoke, low-volume products, with no need for tooling, allowing for frequent design iterations (NIST)

Of course, the fastest method to produce 1-off samples may not be ideal for higher volume runs, or vice-versa, and your manufacturer will be able to advise accordingly, and potentially suggest design alterations to enable easier production, alternative materials, require tooling, etc. This is better identified at an early stage, before committing to a final design.

Effective use of prototyping

Don’t just create a prototype for the sake of it, and to gain buy-in from stakeholders – ensure that it addresses specific points, such as fit, function, ease of installation, robustness, etc.

NIST provides a range of resources relating to how it can aid manufacturers, including in areas such as developing prototype, material characterisation, testing, etc. Ensure you cover the key failure modes of your product, as applicable.

Have a clear definition of the purpose of the prototype, then evaluate it accordingly, e.g. installation on the target furniture, ergonomics, etc., and document your findings, updating design files and revision history as required. Note that, although your prototype(s) may work, there is no guarantee that they will work when produced on a larger scale, with the selected production process!

Considering manufacturing costs and lead times

Just because you are having a product made to your bespoke specification, doesn’t mean that you need to go over budget, but it’s worth understanding the constituent parts of your manufacturing cost, and how each will vary with volumes, e.g. raw material, tooling, operations, QA, packing, shipping, etc. Identify what is a one-off cost, and what scales with each order.

Assess the appropriateness of each production route, bearing in mind the volumes that you are forecasting, and you may wish to explore alternatives if/when demand increases, to reduce overall cost per unit.

You should similarly consider the lead-time for your order, from release of manufacturing drawings, through procurement, to final sign-off of the completed product, and build this into your forecast/planning, allowing sufficient buffer, identifying key milestones, approvers, etc.

Partnering with your manufacturer

As with any supply chain, you’ll want to work with a manufacturer who not only offers competitive pricing, but is also able to offer advice, flag issues, and support change control, etc., during the life of the project/product.

Establish how they handle drawing change requests, sampling, QC, etc., prior to committing, who will action/approve changes, withdraw superseded drawings, assess impact, etc. Seek assurance, e.g. ISO 9001:2026, of the quality management processes in place, but don’t solely rely on this, and investigate their suitability for producing your specific product.

Also establish a protocol for material substitution, raising queries, non-conforming products, etc., to prevent miscommunication, unnecessary delays, etc., as projects grow. This is particularly relevant, as the recent Make UK/PwC survey revealed that 68% of UK manufacturers surveyed had firm plans to boost investment in new product development in 2026. Clear controls and documentation can help teams manage product changes.

By ensuring that you have a solid, clear brief, good record of prototypes, and effective change control, you can manage change more effectively and minimize disruption to your project, customers, and business.

Conclusion

By ensuring that you minimise unknowns, and appropriately address the above, you’ll be better placed to utilise custom manufacturing solutions, and produce 1-off, or serial, products to meet your customer’s specification.